Product Catalog

Platform height can be adjusted from 6" to 7' every 4"

Clamp onto bottom section of a tower to give a wider base, increasing stability.Manufacturer: Bil-jax

Use with guard rail posts, 2 on each side of scaffold.Manufacturer: Bil-jax

When assembled with 7' x-braces & 2 end frames dimentions are 78"Hx7'Lx5'WManufacturer: Bil-jax

Assembled with 7' x-braces & 2 end frames dimentions are 4"Hx7'Lx5'WManufacturer: Bil-jax

Assembled with 7' x-braces dimentions are 5'Hx7'Lx28"WManufacturer: Bil-jax

Steel frame w/expanded steel deck. Hooks onto end frames for secure fit  . Use 1 for bakers up to three for standard end framesManufacturer: Bil-jax

Used to adjust leg hight when on uneven groundManufacturer: Bil-jax

14" wide 500lb cap used with pump jacks, ladder brackets or scaffolding

14" wide 500 lb cap used with pump jacks, ladder brackets, scaffolding

Used for putting a plank between ladders.

20' height self propelled lift. platform can extend out 3'. trailer included.  

aka sky-riser, duct lift. manual lift can hoist up to 500 lbs 20' high

Hydraulic auto-leveling outriggers for faster and easier set up Industry leading 65 mph rated towing speed 24V DC electric Platform controls with one-hand operation of boom functions Accessory mounting tray accommodates customer-provided generator, air compressor or pressure washer Standard air and water lines to the platform Standard Features Telescopic Upper Boom Side Entry Platform 30 x 48 in. (.76 x 1.22 m) Proportional Controls 110V-AC Receptacle in the Platform Auto-Leveling Hydraulic Outriggers Motion Alarm Tilt Alarm/Indicator Light Hourmeter Four 6V 220 Amp-Hour Batteries Battery Condition Indicator Parking Brake Combination Hitch with Adjustable Height Coupler

  • Manufacturer: Bil-Jax
  • Model Number:

WP-196F-6 8" Caster

  • Manufacturer: Bil-Jax
  • Model Number:

Rigid Base Plate, with 4"Stem